- Home
- Case Studies
- Industrial
- Shelters for housing IT equipment
Case study · Industrial
Shelters for Housing IT Equipment
We designed and manufactured a series of shelters to house IT equipment, with R30 intumescent paint applied.

Project Data
We manufactured a series of 16 shelters.
- Client
- Aventech
- End user
- Siemens Energy
- Sector
- Energy industry
- Year
- 2026
- Market where it was implemented
- France
- What was manufactured
- 10 m × 4 m × 4 m shelters
- Services provided
- Technical support for manufacturing, fabrication of the structure, painting and assembly of various elements
- Certifications and standards
- R30 intumescent protective paint and coating inspection by FROSIO Level 3 personnel
- Project type
- Series production based on the customer's design
The Customer's Need
From Drawing to Reality
The customer needed to turn its design of shelters for IT equipment into a manufacturable, fully equipped solution. The shelters had to include the metal structure, advanced fire protection, and the installation of sandwich panels, water gutters, closures and fireproof doors.


The Challenge
Specific Coating Criteria
For our company, the main challenge was applying an intumescent coating for the first time on large-volume shelters, to meet an R30 fire-resistance requirement and reach thicknesses of up to 4,000 microns.
The difficulty lay not only in applying the coating, but also in correctly defining the process and resolving the technical details that arose during the work.
The Solution
Strict Quality Control and Coordination
The solution was to define and validate the coating application process together with the paint supplier and the customer, through several technical visits and reviews of the procedure.
We also reinforced quality control with a FROSIO Level 3 inspector from our team, complemented by inspections by the supplier, the customer and a third party appointed by the customer. In this way, we ensured that the intumescent coating met the requirements established for the project.


The Work Carried Out
Design, Manufacturing, Support and Verification
We started from the design provided by the customer, to which our team contributed technical support. We then fabricated and welded the shelters’ metal structures, before applying the coating.
The sandwich panels, water gutters, closures and fireproof doors were then installed, with the joint details and finishes also specified.
The Result
Strong, Safe Shelters
The project provided Aventech with a series of fully manufactured and equipped shelters to house IT equipment with enhanced fire safety.
In addition to the installation, we took charge of the detailed definition of the finishes and joints between the different elements, such as gutters, sandwich panels and other auxiliary components. This work requires a high level of precision to ensure watertightness, correct integration between systems and a consistent finish across the whole assembly. Attention to these small details directly improved the quality of the final result.
For the customer, this approach made it possible to centralise different phases of the project with a single supplier, from structural manufacturing to finishes and final assembly, which streamlined coordination and helped achieve the final result.
Key Metrics
Key project data.
4,000 microns
coating thickness
16 shelters
manufactured in two series of 8
FROSIO Level 3
for coating inspection
Gallery
Here is the manufacturing process behind the two series of shelters for IT equipment.





CONTACT


